History

Launched the production line for the assembly of an electronic braking system for trailers (Naberezhnye Chelny).
Work is ongoing on the design, production, installation, and commissioning of the anode preparation line from CEM cathodes and the anode residue washing machine for the UMMC metallurgical holding.
LLC "UrIC" received the status of a "Small Technological Company".
Ongoing work on the modernization of wing and fuselage riveting machines for PJSC "Tupolev".
UrIC is launching the third modernized stretch forming press for the production of aircraft parts for PJSC "Tupolev".

Number of employees: 443

The equipment for the pipe endurance testing stand has been shipped for Transneft-Diascan, Lukhovitsy.
Overhaul and modernization of the P-8041 hydraulic press at the metallurgical site of JSC "POLEMA" have been completed.
Effective "science-production" interaction continues – a new workshop is under construction for the production of electrohydraulic power amplifiers with an electromechanical transducer of the electrodynamic type with an extended frequency range. The project is being implemented with the support of grants from the Federal Target Programs of Russia (FTP) and Decree No. 218 of the Government of the Russian Federation dated April 9, 2010, "Scientific and Technological Development of the Russian Federation," as well as the Ural Interregional Research and Education Center of World-Class "Advanced Production Technologies and Materials."

The RO-630 stretch-draw press has been modernized for PJSC "Tupolev."
A satellite testing stand – a universal three-axis servo-hydraulic vibration stand – has been commissioned for the Roscosmos State Corporation.
Serial production of shut-off and control valves for press control hydraulic systems and scale flushing in rolling mills has been launched.

Launch of the first phase of a new workshop – high-tech production of hydraulic drives with hydrostatic guides
Participation in full-scale cyclic testing of titanium alloy pipes for the National Research Center "Kurchatov Institute" – Central Research Institute of Structural Materials "Prometey" (Gatchina)

LLC "UrIC" has become the official dealer of "SIGMA GROUP a.s" in the Russian Federation.
The company was recognized as the winner in the "New Geography" category at the regional competition "Exporter of the Year of the Chelyabinsk Region 2019."
Work is underway on the design, manufacture, and supply of the air supply system for the acoustic reverberation chamber ARC-1500 for JSC "ISS named after Academician M.F. Reshetnev."
UrIC has become an official dealer of ADDIS GRUPPE.

At the request of the Russian State Corporation "Roscosmos," the mechanical impact testing complex of the MIC has begun to be equipped with custom technological equipment - a universal three-axis servo-hydraulic vibration test bench for JSC "ISS named after Academician M.F. Reshetnev."
The company's specialists successfully commissioned a new arc ore-thermal furnace, supplied to the Chelyabinsk Electrometallurgical Plant by the Korean company SAC (UrIC has been cooperating with ChEMK on the modernization of ore-thermal furnaces since 1999).
Representatives of the Cheltec holding participated in the Global Manufacturing and Industrialization Summit - GMIS 2019.
The company was nominated for the national award in the field of import substitution and technology transfer PRIORITY-2019.

An innovative galvanic section for chrome plating rotating parts has been commissioned.
A new hydraulic press with a force of 40 MN for pressing titanium sponge was delivered to PJSC "Ruspolimet," Kulebaki.
Won 2 tenders from PJSC "Transneft" for the production of a stand for conducting parametric tests of large-scale models of flow parts of pumping equipment and a unique stand for testing pipes for durability.
A major modernization of the PA-1343 press complex with a force of 20 MN was completed at PJSC "Severstal."
Participation in the "Rig of the Future" project – a proposal for the supply of hydraulic equipment components for next-generation ROF drilling rigs for Schlumberger.

Participation in a large-scale project for the construction of the casting and rolling complex of LLC "Tulachermet-Steel" – installation of hydraulic and thick lubrication pipelines for the heating furnaces of Stand 9501 and Stand 9511 of the casting and rolling complex.
URIC became a member of the Chamber of Commerce and Industry of the Russian Federation.
A PZT lubrication system was developed, designed, and delivered for Stand 1700 in Rolling Mill-1 for PJSC "Severstal."
A stand for assembly and disassembly of rolling mill rolls was completed at the Kirov Non-Ferrous Metal Processing Plant (Kirov).

One of the largest projects in Russia's oil and gas industry has been implemented – the launch of the "Plant for Localizing the Production of Pump Equipment. Assembly Production. Testing Center."
Modernization of control systems for DSP-25 has been completed for JSC "Izhevsk Machine-Building Association" (Izhevsk) and PJSC "NLMK" (Lipetsk).
Number of employees – 120 people.

A ring-rolling mill was created for PJSC "Ruspolimet" (Kulebaki).
Unique modernization of the UNITED press with a force of 2000 tons was completed for LLC "Severny Metallocenter," St. Petersburg.
A major overhaul of the three-roll bending machine by "VERRINA" was completed for PJSC "Volgogradneftemash," Volgograd.

Cooperation began with LLC "Kliver" (customer - LLC "SGK-Drilling" and LLC "Eurasia Drilling Company") for the supply of hydraulic systems and control cabinets;
A test stand for towers (masts) of hoisting units was completed for PJSC "Surgutneftegaz," Surgut.
A new modernized section for the production of high-pressure hoses was launched.
Number of employees - 80 people.

Creation of the "UrIC NT" service center aimed at performing equipment maintenance in the divisions of EVRAZ NTMK (Nizhny Tagil).
The Governor of the Chelyabinsk region awarded the president of the Cheltec group of companies, Valery Bodrov, with a Silver Medal, diploma, and gratitude for the best invention and innovative technologies.
UrIC took 2nd place in the nationwide ranking.
Work is underway on a large-scale modernization of the hydraulic system and control system of the movable traverse of the 6300 tf press model P8148 for JSC "Elektrostal Metallurgical Plant," Elektrostal.

The company LLC "Ural Engineering Center" became the official representative and engineering partner of FUCHS Technology AG (Germany) in Russia;
The scale-breaking hydraulic system at the Sinarsky Pipe Plant was commissioned, fully implemented by UrIC;
After the modernization, the productivity of the wheel press-rolling line, supplied by SMS Eumuco for JSC "NTMK," Nizhny Tagil, has been significantly increased.

The piping of the hydraulic station for the reconstruction and restoration project of the State Academic Bolshoi Theatre (drive power up to 2.7 MW) has been completed;
Work is underway on the extensive modernization of a vertical hydraulic double-acting stamping press with a capacity of 4000/6500 tons at JSC "Uralchimmash".

A stand for statistical and endurance testing of next-generation pipes for main gas pipelines with a diameter of up to 1420 mm and pressure up to 40 MPa has been installed at the enterprise of JSC "Gazprom-Transgaz" (St. Petersburg). Technical support for the testing of trial pipes on this stand was also provided.<br />
Extensive work was carried out on the development, supply, and installation of a press for testing oil and gas pipes with a diameter of Ø57-Ø219 at a pressure of up to 400 atm at JSC "Pervouralsk New Pipe Plant".<br />

A joint venture with SMS - Siemag AG (Germany) for the repair of CCM molds – "SMS - CHELTEC" was established;<br />
Modernization of the hydraulic system and control system of the NP-130 press at JSC "VSMPO-AVISMA".<br />

Participation in the project for the creation of the international experimental thermonuclear reactor ITER. At the request of the state corporation "Rosatom," a model of the elements of the cooling system for the thermonuclear reactor with a total capacity of 500 MW was developed and manufactured.
New machines – backhoe loaders – were developed at the proposal of "ChTZ-Uraltrac" LLC.
Organization of equipment service at the "TRUBODETAL" enterprise (OMK Holding) on an outsourcing basis.

The company underwent restructuring – the Ural Engineering Center group of companies was established;
For the first time, a large-diameter pipe hydraulic testing press (up to 1420 mm) was designed and manufactured in-house for "Kopeysk Pipe Insulation Plant" JSC and "GAZPROM" JSC.
Production of seals from polyurethanes was organized using equipment from the Austrian company ECONOMOS;
The Moscow branch – "UIC-S" LLC – was established.

Commenced development of two production workshops with a total area of 8,000 sq. m.
A section for the production of hydraulic and pneumatic cylinders, as well as pump stations, was organized.
First project in Armenia: modernization of the continuous aluminum rolling unit for "RusAl-ArmenAl" CJSC, Yerevan.

Established the first joint venture in Russia with SMS DEMAG, CJSC "Magnitogorsk Service Center" in Magnitogorsk - providing outsourcing-based maintenance of hydraulic equipment.
Organized a Service Center in Chelyabinsk to service equipment at PJSC "ChTPZ".
Established and certified a chemical laboratory for the analysis of working fluids.